Como había prometido en el post de Pantalones pitillos DIY . Aquí está el tutorial de la chaqueta a juego con patrón gratis incluido.
Es una chaqueta muy sencilla que te servirá para múltiples proyectos. Fresca, porque no tiene forro y si la confeccionas con un tejido de lino o algodón, será ideal para las noches frescas de la temporada.
Materiales:
- Tejido de algodón con un mínimo de 2% de elastano.
- Tijeras
- Alfileres
- Maquina de coser
- Entretela
- Patrón que puedes descargar gratis AQUI
Proceso:
1. Dobla el tejido en dos y posiciona las piezas del patrón paralelas al borde con la lineas que tienen dibujadas en el medio cada pieza.
2. Corta las cantidades de piezas recomendadas en el patrón. Deja 1cm de margen al rededor de cada pieza. En la parte del bajo deja de 3 a 4 cm.
3. Une las mangas por la parte del revés. (Recuerda diferenciar que manga es la derecha y cual la izquierda por los cortes dobles para las sisas)
*Puedes pulir todos los bordes con una overlock, pero si no tienes, usa el modo zig-zag de tu máquina de coser.
4. Plancha entretela en la vista del cuello espalda y el la vista de las piezas del centro delantero.
5. Cose todos los cortes verticales. (costados, centro espalda, y cortes laterales)
6. Une las vistas del cuello de espalda con entretela a la vista de las piezas del delantero por los hombros.
7. Une los hombros de la chaqueta.
8. Ahora une los pasos 6 y 7 posicionando las vistas por fuera del revés con la chaqueta y cose todo el borde con 1cm.
9. Antes de girar las vistas hacia el interior de la chaqueta, haz unos pequeños cortes en las zonas curvas de la nuca. (ayudará a sentar mejor y que las costuras interiores no tiren de la prenda)
10. Aqui tienes las vistas ya hacia dentro y planchadas. He hecho el bajo subiendo los 3 cm de margen que he dejado con unas puntadas a mano.
11. Haz los bajos de las mangas también de la misma forma.
12. Por último solo te queda montar las mangas. Empieza uniendo la costura del costado con la costura de la manga y ve posicionando la manga de ahi hacia arriba por cada lado. Repartiendo uniformemente el tejido.
* Si es la primera vez que montas una manga, no te preocupes si queda mal y te es difícil cuando la cosas… Cuando empecé a coser era lo que más me frustraba, pero con un poco de paciencia y práctica, lo conseguirás. No te desmotives si tienes que descoser 3 veces… es parte del aprendizaje.
¡Ya tienes tu chaqueta lista! Es una chaqueta básica sin forro, botones, ni bolsillos, ideal para quien quiera intentar por primera vez hacer una chaqueta con patrón desde cero.
Solo tienes que descargarte el patrón e imprimirlo en la misma escala a la que está. Es un patrón de chaqueta talla S-M. Si quieres hacer una talla más grande, debes de ir agregando 0.50 cm en todas las costuras horizontales por cada talla que subas.
Espero te haya gustado este tutorial y te animes a hacerte tu propia chaqueta desde cero en tu tejido favorito!
¡¡¡Hasta la próxima DIY’er!!!
INCREIBLE!!Sin duda cuando acabe los exámenes me haré el conjunto! Gracias por ser tan generosa y compartir
MA-GIS-TRAL!!!
hi Anna when i tried to download the pattern, it came out shrunk. not too used to downloading patterns. please help!
Have you tried to downloaded in the same size in PDF? It’s in the correct size if you downloaded in PDF and print it out on big scale 😉
Hi anna, i tired to print it 100% scale but it only prints one page, is anyone else having this problem? thank you for the great post
Hi Mai, did you print it on a big scale printer in a print center?… Ill will not work on a regular printer.
i had the same problem. use adobe acrobat and then in print settings set it to 100%. i did that and it printed fine – 18 pages, though! hope that helps!
http://inthecitybythesea.wordpress.com/
Thank so much for sharing this!!! 😀
me encanta!!!!! parece tan sencillo… lo quiero probar, a ver que tal sale! ya te contaré!! muchas gracias por compartir!!!!
Gracias Coral! me haría mucha ilusion ver tu resultado! 😀 😀
Eres creativa encantadora && linda By: meches :DD Gracias por compartilo , te cuento es mi primera vez aqui && me tienes sorprendida … Bendicionees && sigue adelante
Gracias Meches!! 😀 Me alegro te guste el blog!
wow…THIS IS AMAZING!! GRACIAS, much inspired by your diys!
Thank you 😀 Im so happy you like it!
hi anna… this pattern is very cool.. i really want to try it… but it seems my printer cannot support to print this pattern… it is possible for me to change it? it is because my printer too small… just can print A4 size.. if it possible to change it, can you help me to tell how to resize the paper size? thank you^^
you have to print it on a big scale printer not on a home printer, the best you can do it’s download the pattern on to a CD or a pen drive and have it printed in a printing kiosk.
Thank you, hope this helps 🙂
Hey! I printed it on my home printer. I used the option “poster” so I have it in pieces and I merged them with tape. I don’t know if all the printers have this option.
I hope this helps. 🙂
That’s a great help to all us!! thank you so much for sharing this Loanna!!
Hi! Which sizing option did you use when you chose poster?
You have to choose to visualize it at 100% 😉
Eres increíble…de verdad, es el mejor blog de makers que he visto hasta ahora. Además, leyendo tu biografía no podría identificarme más contigo, no hay nada más bonito que hacer las cosas con tus propias manos! muchas muchas gracias por compartir tus conocimientos. Yo hace poco que abrí mi blog de moda. Me encantaría que te pasaras y me dieras tu opinión, si me siguieras también estaría muy agradecida! muchas gracias de nuevo por tu blog. Besos, Anna
http://www.iamlaflaca.com
Gracias tocaya!!! Que mensaje más bonito! Me has hecho el dia!!! mas bien la semana XD Me he pasado por tu blog y me encanta!!! y tiene una estética muy muy chula! enhorabuena por tu blog!!! Ya me tienes de seguidora en bloglovin! ^^ muchos exitos!!!!
anna, how did you ‘finish’ the inside of the jacket? i’m thinking of giving the pattern a go and using hong kong finished seams. http://www.burdastyle.com/techniques/hong-kong-binding-seam-finish what do you think? do you think it’s necessary?
http://inthecitybythesea.wordpress.com/
Hi Nicole!!! If you want a pretty and polished finished look inside it’s a great option… but it’s more work of course… I would recommend you to do what you like the best… If you have the extra time go for it girl! It’s always so rewarding to have a great piece with great inner details (maybe in a cool contrasting color) 😉
Where can I get this wonderful fabric?
HI Aqueelah! You can find this at Ribes y Casals 😉
Will give it a go and let you know how it turns out! Nice to meet a fellow Barcelona-er, btw! 🙂
How cool! we are neighbors 😉
I am almost finished my jacket! I did it in a heavy knit for winter. I will post it to my blog. Can I reference your tutorial?
How cool! I’m dying to see your results!! I will love if you make a reference to the tut!! 🙂 you can also share your link with all of us on Facebook!! Good luck with the lasts stitches!!!
Hey!!!
Is the interlining necessary?
Thank you! 🙂 (nice tutorial!)
I recommend it, because it makes the front part a bit stiff and polished and it’s easy to make it look more pro. but it’s not obligatory 😉
Hey Anna! Here is what I’ve done so far with the jacket. Check it out!
http://inthecitybythesea.wordpress.com/2013/09/21/winterized-anna-evers-jacketblazer/
amazing! thanks for sharing!!!
Do you have any tips if I was interested in adding a lapel?
how so?
If I wanted to add something like this…
http://blog.monstervintage.com/wp-content/uploads/more-lapel-styles.gif
do you have any experience with adding a similar shape to a jacket?
Hi, This type of collars are integrated in a different kind of pattern… If you’ll like to try this type of blazer collar I think the best way is if you buy a pattern with this cut, because it’s very difficult to get this looking good with my pattern since is not based to make this collar… Try maybe looking a BURDA magazine for blazers… 🙂 Hope this helps
Hi as the pattern is all on one page how do i get the printer to print each section i am printing at home.
Please help
You have to print it in a large scale printer or set your normal printer to cut it up in normal pages (some printers can do this) 🙂
Muy buena tu info y muy completa.
Perdona mi ignorancia pero como hago para imprimir los patrones? Porque me figuran en una sola hoja y si lo imprimo asi, obviamente, no voy a poder hacer el saco
Hola Anabella!, debes de imprimirla en una impresora gran formato 🙂
Have you tried to downloaded in the same size in PDF? It’s in the correct size if you downloaded in PDF and print it out on big scale 😉
http://www.oasap.com/97-jackets
Thank’s for sharing Alie!! 😀
Hi, I am having problems printing off your pattern. I am working on a mac, any tips? Also do you have the measurements so I can try and draw the pattern myself? Many thanks, Heather
HI Heather, you have to open the patter in PDF and visualize it to the 100%. You have to open it in 100% to get the measures right. It’s for a medium. So your waist should be about 70cm and hips 90cm 🙂
hola buenas noches me encanta el blazer azul como para descargarlo en tamaño real
If I wanted to add lining on the inside, how would I do that? Thanks for the tutorial!
Hi Joy! You can cut the same shapes of the patterns and take off the back neck and the front parts with interfacing. Sew the jacket and then the lining together in all the corners. 🙂 good luck
I have another question, does the pattern include seam allowance? Or will I just have to cut the seam allowance out? Thanks again!
Nevermind I didn’t read the instructions!
hola, me encanta tu blog , pero tengo un problema, es que los patrones solo me los imprime en una hoja, alguien tiene el mismo problema? sabeis como puedo solucionarlo? imprimo todos mis patrones en casa y es en la unica pagina en la que me salen asi… gracias
Hola! 🙂 Tienes que imprimirlo en una impresora a gran escala, si no tienes como dar con una, intenta imprimirla en tu impresora casera visualizando el PDF en tamaño 100% (algunas impresoras tienen el programa de dividir por folios la visualización) esta es la forma en la que podrás hacerlo 🙂 suerte!
pero no sabremos exactamente en q escala esta pues y sila imprimimos en ploter en q hoja en a0 a1 en q tamaño de hoja sera pues
hola Jenny, solo tienes que visualizar al 100% y la escala te saldrá a la perfección (imprime en un papel de 1 metro o mas de ancho 😉
What a perfect pattern, I used it to make a hot pink jacket. Love to finally have a jacket that is long enough to cover my whole arms. I have to say that this was the first time I made something from a pattern ( I only made pillowcovers before, haha), and it was a litle tricky with the double fron parts, but overall it was really easy, thank you so much!! 🙂
Thank you so much for telling us and sharing your DIY experience!!! We would love to see your results, please show us on our Facebook page or email us a pictures! we will be happy to post it!! 😀 I’m so happy you like this pattern and that the fit was good 😀 Thanks again for reading our blog and being part of our DIY family!! xx
Unfortunately I only have a really crappy picure, but I’ll comment it to the facebook post. 🙂
No problem!!! show us!! show us!!!
I can’t see the pattern it says the link is broken
Hi Mj ! I’m so sorry for the pattern 🙁 I’m having difficulties with my server at the moment, I can’t fix the problem fast because I’m out of Barcelona and don’t have my files on me… I’m working on fixing the problem as fast as I can, I will let you know as soon as the pattern is working again… sorry again for any inconvenience 🙂
Hola, me encanta tu página y los tutoriales; pero los patrones no me salen parece que el enlace se desabilito. Si no es mucha molestia podrías arreglarlo.
Gracias
Hola Gerald, perdona, pero estoy teniendo problemas técnicos con el servidor… estoy intentando arreglarlo lo antes posible, pero estoy fuera de Barcelona y no tengo mis archivos a mano. Desde que los archivos estén listos para descargarse nuevamente lo anunciare por Facebook. Perdona cualquier inconveniente.
Thank you Anna, I appreciate it.
Hello! I wanted to know what you meant in this step…”2. Cut the amount of pieces written in the pattern pieces. Leave 1cm margin around each piece. In the end leave a margin of 3-4 cm.” When you say leave in the end a margin of 3-4 cm is that the seam allowance? or is it 1 cm? I’m a bit confused on how much i should leave for the seam allowance while I cut out the fabric. Thank you!
Hi Carmela! you should leave 1 cm all around the pattern, but at the bottom you should leave 3-4 cm margin to make a full fold up (at the bottom at your blazer) 😉
AMIGA NO SE COMO DESCARGAR EL PATRON EN TAMAÑO REAL, ES QUE ME SALE EN TAMAÑO MINIATURA, COMO HAGO AYUDAME , ME ENCANTA L CHAQUETA
visualizalo al 100% 😉
I was wondering how much fabric would I need to Purchase and would I be able to find fabric with 2% elastane easily? If not where did you purchase your fabric? And is it completely necessary?
P.S. if it matters I’m a size small
Hi Jasmine! I bought it here http://www.tiendatelas.com/ you should buy about 1.50 meters. It’s better if the fabric has a bit of elastane, because you will be able to move better… But since you are a size small I think you’ll have no problem with a regular fabric. But before you fix the sleeves, and finish completely the garment, try it on to make any modifications on you 😉 Good luck!!!
Hola muy linda la chaqueta!!!! en donde puedo descargar los patrones
En la sección de los materiales verás que pone Descarga aqui 😉
Oh you are wonderful. I needed an easy jacket pattern like this to make a nice purple and red jacket and it worked! I had to alter the sleeves and the front part though, I hope you don’t mind my meddling 😮 I will be posting the finished jacket soon after I finish my matching skirt and tee! It will be here: http://www.missoverture.blogspot.com and again, thanks!
donde puedo descargar el patron…
En la sección de materiales 😉
hi anna!
thanks so much for the pattern and tutorial!
it was my first jacket and it fits just perfect!
would it be alright if I post your pattern (incl link to here) on my blog? it’s in german and I would like to make a small tutorial for my german-speaking readers as well…
would love if that would be ok with you!
regards from Vienna, Austria,
Tina
(misstinamakes.blogspot.com)
Hi Tina! No problem, as long as you re link my tutorial 🙂 Great job!!!
Hi Anna!
Thanks so much for the pattern and tutorial! , I feel U are so great. i like all in your blog. thank you so much.
Que linda que es!! Gracias por compartir los moldes :). Qusiera saber si se puede realizar en otro tipo de tela que no sea elastica, como lino o gabardina, gracias!!
Si que puedes… pero ten en cuanta que será ajustada 😉
Great post.
Can i use this pattern using denim or it will need to be modified?
do you have pattern for notched collar?
Hi Esraa, You can make this blazer with denim fabric, no problem… just remember it wont have the strech. I don’t have a pattern for a notched collar, sorry. This is just a simple blazer for beginners.
Holaaa m encanta, tengo mucha manta se podrá hacer con esta tela?? Saludos, gracias!
Hola me encanta la chaqueta pero tengo una L, como podría agrandar el patrón?? Gracias por tu ayuda.
Felicidades por el blog es fantástico!
Hola Miriam! En tu caso agrega un par de centímetros a los costados y así tendrás un poco extra de tejido… si sobra siempre le puedes ajustar.
¿Como se descarga el patron? En que medidas se imprime para que no se reescale el patron
Solo tienes que guardar el documento tal cual y llevarlo a una copisteria/imprenta para que lo impriman a gran escala al 100%. Eso es todo 😉 Buena suerte!
Muy chula!!!! y la tela es preciosa!!!
Un besote
Cris de Cosas de Butterflies
Thank you for this fantastic pattern!! I havemadebtwo jackets and have plans for a third one. keep up the great work, I can’t wait to see what you have for us to do next!
Thank you Catherine!! 🙂 I’m happy you liked it! 😉